Family Boating and Marine Centers' service department is widely regarded as the most experienced and professional marine technicians in the Tampa Bay area. Dedicated to customer service and diagnosing any problems correctly the first time in, makes this staff a pleasure to work with even when your vessel is running at less than 100%. Regular maintenance to your engine goes a long way to preventing future hassles, so let our factory trained mechanics service your motor every 100 hours with genuine parts and lubricants. Our expert riggers can install just about any marine accessory and can help you design your custom "dream boat"!
Yamaha 20-Hour Check
Tampa, FL
Service Description
Model | Parts | Labor | Shop Supplies | EPA | Sub Total | Tax | TOTAL | |
F40-70 | $111.94 | $228.00 | $14.75 | $3.50 | $358.19 | $26.86 | $385.05 | |
F75-115 | $124.78 | $304.00 | $14.75 | $3.85 | $447.38 | $33.55 | $480.93 | |
F150-200 inline | $128.46 | $304.00 | $14.75 | $3.85 | $451.06 | $33.83 | $484.89 | |
F200-300 V6 | $155.97 | $380.00 | $14.75 | $3.85 | $554.57 | $41.59 | $596.16 | |
F350 V8 | $157.11 | $380.00 | $14.75 | $3.85 | $555.71 | $41.68 | $597.39 | |
F425 V8 | $251.59 | $532.00 | $14.75 | $3.85 | $802.19 | $60.16 | $862.35 |
Motor Items:
- Anodes: Check and replace if necessary. *Additional charge for parts if required
- Cables: Check for operation (throttle and shift)
- Cooling System: Check for operation
- Cylinder Heads: Torque bolts as necessary
- Engine: Clean and spray with lubricants and Yamashield
- Engine Compression: Test compression and record on service ticket
- Fuel Filter: Inspect
- Fuel Lines: Check for leaking, splitting, or rotting
- Hours on Motor: Record on service ticket
- Ignition Timing: Check, set if necessary
- Lower Unit: Inspect and change lubricant
- Power Trim and Tilt: Inspect and Check fluid level
- Propeller: Remove, Clean and lubricate shaft
- Service Indicator/Alarm: RESET
- Spark Plugs: Replace
- Thermostat: Check for operation. *Additional charge if replacement necessary
- Water Cooling Inlet: Inspect
Systems Check:
- Battery: Check connections and electrolyte levels, load test
- Electrical System: Check for operation
- Electronics (Radio, GPS, VHF, etc.): Check for operation
- Fuel Tank: Take samples, check for water and/or trash
- Fuel/Water Separator: Replace
- Gauges: Check for operation
- Livelwells: Check for operation
- Pumps: Check for operation
- Steering System: Inspect
- Shallow Water Anchor: Check for operation
- Trolling System: Check for operation
- WET TEST: ALL motors are wet tested